上海帆扬机电有限公司  Shanghai Fan Yang Mechanical and Electrical Co.,Ltd

行业分类
  • 温度仪表 Temperature
    热电偶 Thermocouple
    热电阻 Thermistor
    温度计 Thermometer
  • 压力仪表 Pressure
    压力表 Pressure gauge
    变送器 Transmitter
    控制器 Controller
  • 流量仪表 Flow meter
    就地指示 On site
    远传变送 Transmission
  • 液位仪表 Level instruments
  • 调节阀     Regulating valve
    电动阀门 Electric valve
    气动阀门 Pneumatic valve
    阀门附件 Valve accessories
  • 显示记录  Display Records
  • 在线分析 On-line analysis
  • 代理品牌 Proxy brand

WZP装配式热电阻

 
产品详情

一、产品简介    Product introduction

        工业用热电阻作为测量温度的传感器,通常和显示仪表、记录仪表和电子调节器配套使用。它可以直接测量各种生产过程中从-200℃~420℃范围内的液体、蒸汽和气体介质以及固体表面温度。

        Industrial thermal resistance as ameasurement of the temperature sensor, Usually, and display instruments,recording instruments and electronic supporting the use of regulator. It can bedirectly measured in various production processes From -200 ℃ ~420 ℃ range ofliquid, steam and gas and solid medium surface temperature.


        根据国家规定,我公司生产符合IEC国际标准分度号的Pt100、Pt1000铂热电阻和符合专业标准分度号的Cu50铜热电阻两大类组成两大类装配式、统一设计型热电阻。

        According to the provisions of the state,Our company in line with the IEC international standard index number   Pt100, Pt1000 platinum thermal resistance Andin accordance with the professional standards index number Cu50 thermalresistance two categories two kinds of assembly type, unified design thermalresistance.


二、工作原理    Operational principle

        工业用热电阻,铂热电阻和铜热电阻两大类。

The thermal resistance of industrial,platinum thermal resistance and thermal resistance of two kinds of.


        热电阻是利用物质在温度变化时自身电阻也随着发生变化的特性来测量温度的。热电阻的受热部分(感温元件)是用金属丝均匀地双绕在绝缘材料制成的骨架上。当被测介质中有温度梯度存在时,所测的温度时感温元件所在范围内介质层中的平均温度。

        Thermal resistance is when the temperaturechanges its resistance along with the characteristic changes of temperaturemeasurement using the material. The thermal resistance of the heating part(temperature sensor) is made of metal wire even double wound on the insulatingmaterial on the skeleton. When measured in the medium temperature gradientexists, The average temperature of the measured temperature is the temperatureof the components within the dielectric layer in the.


        装配式热电阻主要由接线盒、保护管、接线端子、绝缘套管和感温元件组成基本结构,并配以各种安装固定装置组成。

        Assembly type thermal resistance is mainlycomposed of a junction box, protection tube, terminals, the insulating casingand the temperature sensing element is the basic structure, And with a varietyof mounting and fixing device.

       

        WZP型铂热电阻的感温元件是一个铂丝绕组,双支铂电阻主要用于需要用二套显示、记录或调节仪同时检测同一地点温度的场合。

        The temperature sensing element WZPplatinum thermal resistance is a platinum wire winding, Double platinumresistance is mainly used to detect the same place temperature occasions withtwo sets of display, recording or regulator.


        WZC型铜电阻的感温元件是一个铜丝绕组。

        Temperature sensing element type WZCcopper resistance is a wire winding.

热电阻工作原理.jpg


三、技术参数   Technical parameter

热电阻技术参数.jpg


四、选型图谱    Selection chart

热电阻选型图谱.jpg


五、外形尺寸   External dimensions

热电阻外形尺寸.jpg


六、产品分类 Product classification

热电阻产品分类.jpg


七、接线说明   Wiring Instructions

热电阻接线说明.jpg


八、安装示意图    Installation diagram

热电阻安装说明.jpg

以上参数仅供参考,如有改动恕不另行通知!

Above parameters arefor reference only and are subject to change without prior notice !