上海帆扬机电有限公司  Shanghai Fan Yang Mechanical and Electrical Co.,Ltd

行业分类
  • 温度仪表 Temperature
    热电偶 Thermocouple
    热电阻 Thermistor
    温度计 Thermometer
  • 压力仪表 Pressure
    压力表 Pressure gauge
    变送器 Transmitter
    控制器 Controller
  • 流量仪表 Flow meter
    就地指示 On site
    远传变送 Transmission
  • 液位仪表 Level instruments
  • 调节阀     Regulating valve
    电动阀门 Electric valve
    气动阀门 Pneumatic valve
    阀门附件 Valve accessories
  • 显示记录  Display Records
  • 在线分析 On-line analysis
  • 代理品牌 Proxy brand

WR□装配式热电偶

 
产品详情

一、产品简介    Product introduction

        WR系列工业用装配式热电偶作为测量温度的传感器,通常和显示仪表、记录仪表和电子调节器配套使用。它可以直接测量各种生产过程中从0C~1800℃范围内的液体、蒸汽和气体介质以及固体的表面温度。

        WR series of industrial assembly typethermocouple as the measurement of the temperature sensor, Usually and displayinstrument, Recording instrument and electronic supporting the use ofregulator. It can directly measure the various production process from 0C~1800℃ range Liquid, steam and gas and solid medium surface temperature.


        根据国家规定,我公司生产符合IEC国际标准分度号的铂铑30-铂铑6、铂铑10-铂、镍铬-镍硅、镍铬-铜镍、铜-铜镍、铁-铜镍等形式。

        According to the provisions of the state,Our company in line with the IEC international standard index number Platinumand rhodium30-Platinum and rhodium6、Platinumand rhodium10- Platinum、Nickelchromium - nickel silicon, Nickel - chromium, Copper copper - nickel, Ironcopper - Nickel Form.


二、工作原理    Operational principle

        热电偶的工作原理是:两种不同成分的导体两端经焊接、形式回路,直接测温端叫测量端,接线端子端叫参比端。当测量端和参比端存在温差时,就会在回路时产生热电流,接上显示仪表,仪表上就指示出热电偶所产生的热电动势的对应温度值。

        Thermocouple Working principle. Twodifferent components of the conductor ends by welding, form loop, Directtemperature measuring end called the measuring end, The terminal end is calledthe reference terminal. When the measuring end and the reference end Temperaturedifference, Will be in the loop Thermal current, Connected to displayinstrument, The instrument will indicate the thermocouple Thermal electromotiveforce Corresponding temperature.

   

        热电偶的热电动势将随着测量端温度升高而增长,热电动势的大小只和热电偶导体材质以及两端温差有关,和热电极的长度、直径无关。

        Thermocouple electromotive force withThe measuring end temperature and growth, The size of thermal emf Only andthermocouple conductor material And the temperature difference between the twoends of the relevant, And the power electrode length, diameter.

   

        装配式热电偶主要由接线盒、保护管、绝缘套管、接线端子、热电极组成基本结构,并配以各种安装固定装置组成(见下图)

        Thermocouple assembly is mainly composed of ajunction box, protection tube, insulating sleeve, terminals, power is the basicstructure, And with a variety of mounting and fixing device (see below).

热电偶工作原理.jpg


三、技术参数   Technical parameter

热电偶技术参数.jpg



四、选型图谱    Selection chart

热电偶选型图谱.jpg


五、外形尺寸    Externaldimensions

热电偶外形尺寸.jpg


六、产品分类   Product classification

热电偶产品分类.jpg


七、安装说明   Installation instructions

热电偶安装说明.jpg

以上参数仅供参考,如有改动恕不另行通知

Above parameters are for reference only and are subject to changewithout prior notice