上海帆扬机电有限公司  Shanghai Fan Yang Mechanical and Electrical Co.,Ltd

行业分类
  • 温度仪表 Temperature
    热电偶 Thermocouple
    热电阻 Thermistor
    温度计 Thermometer
  • 压力仪表 Pressure
    压力表 Pressure gauge
    变送器 Transmitter
    控制器 Controller
  • 流量仪表 Flow meter
  • 液位仪表 Level instruments
  • 调节阀     Regulating valve
    电动阀门 Electric valve
    气动阀门 Pneumatic valve
    阀门附件 Valve accessories
  • 显示记录  Display Records
  • 在线分析 On-line analysis
  • 代理品牌 Proxy brand

WR□K铠装热电偶

 
产品详情

一、产品简介    Product introductio

        铠装热电偶具有能弯曲、耐高压、热响应时间快和坚固耐用等许多优点,它和工业用装配式热电偶一样,作为测量温度的传感器,通常和显示仪表、记录仪表和电子调节器配套使用,同时亦可以作为装配式热电偶的感温元件。它可直接测量各种生产过程中从0~800℃范围内的液体、蒸汽和气体介质以及固体表面的温度.

        Armored thermocouple can bend, resistanceto high pressure, fast thermal response time Many advantages and durable,Assembly type thermocouple it and industrial, As a measurement of thetemperature sensor, Usually, and display instruments, recording instruments andelectronic supporting the use of regulator, At the same time, also can be usedas a temperature sensing element assembly type thermocouple. It can be directlymeasured in various production process from 0~800 ℃ range of liquid, steam andgas solids and surface temperature.


二、工作原理    Operational principle

        铠装热电偶的工作原理是,两种不同成份的导体两端经焊接,形成回路,直接测温端叫测量端,接线端叫参比端。当测量端和参比端存在温差时,就会在回路中产生热电动势的对应温度值。

        Working principle of armoredthermocouple is, The two different components of the conductor ends by welding,Loop formation, Direct temperature measuring end called the measuring end,Terminal call reference end. When the measuring end and the reference endTemperature difference, Will be in the loop The thermal electromotive forceCorresponding temperature.

   

        铠装热电偶的热电动势将随着测量端的温度升高而增长,热电动势的大小只和铠装热电偶导体材质以及两端温差有关,和热电偶的长度、直径无关。

        Thermal electromotive force of armoredthermocouple Will increase with the measuring end temperature, The size ofthermal emf A thermocouple conductor material And the temperature differencebetween the two ends of the relevant, The length, diameter and thermocouple.

       

        铠装热电偶的结构是由导体、绝缘氧化镁和1Cr18Ni9Ti不锈钢保护管经多次拉制而成。铠装热电偶产品主要由接线盒、接线端子和铠装热电偶组成基本结构,并配以各种安装固定装置组成。

        Structure ofarmored thermocouple is composed of a conductor, Insulation Magnesium Oxide And1Cr18Ni9Ti stainless steel protection and by repeatedly drawn tube. Productsare mainly composed of armored thermocouple junction box, The terminal and thebasic structure of armored thermocouple, And with a variety of mounting andfixing device.

铠装热电偶工作原理ABUIABAEGAAgx-OArwYolsicvAQw7go4hgM.png


三、技术参数   Technical parameter

铠装热电偶技术参数.png


四、选型图谱    Selection chart

铠装热电偶选型图谱.png


五、型号规格    Model specifications

铠装热电偶型号规格.png


六、产品分类   Product classification

铠装热电偶产品分类.png


七、安装说明   Installation instructions

铠装热电偶安装说明.png

以上参数仅供参考,如有改动恕不另行通知!

Above parameters arefor reference only and are subject to change without prior notice!