一、产品简介 Product introduction
EMF5000R智能电磁能量计是一种测量导电介质的感应式仪表,适用于测量导电率大于5μs/cm导电液体的体积流量。同一台电磁能量计能分别测量热量损耗和冷量损耗,在北方供暖中,只测量热量,所以被叫做热量表;在中央空调水的能耗计量中,设计热量(冬天)和冷量(夏天)的损耗,所以又叫做冷热量表。
EMF5000R Intelligence electromagnetismCaloric calorimeter is an inductive instrument for measuring conductive medium.It is suitable for measuring volume flow rate of conductive liquid whoseconductivity is greater than 5 ugs/cm. The same electromagnetic energy metercan measure heat loss and cooling loss respectively. In North heating, onlyheat is measured, so it is called heat meter. In the energy consumptionmeasurement of central air conditioning water, the loss of designed heat (inwinter) and cooling (in summer) is also called cold heat meter.
EMF5000R智能电磁能量计(电磁冷热量表)由流量测量单元、热量计算单元和配对的温度传感器(PT1000)组成。流量计利用法拉第电磁感应原理测量流量,结合配对温度传感器的供回水温度信号,就能计算、累积、存储和显示热交换回路中吸收或释放的冷热量。流量计的流量、能量计算单元CPU及采样模块均采用国际先进的单片机,其内存容量大,设备可靠性高,热量计算能真正实现焓值计算,达到高准确度。成套配对温度传感器采用铂电阻Pt1000,其配对误差≤0.1℃
EMF5000R Intelligence electromagnetismCaloric calorimeter (Electromagnetic calorimeter) consists of flow measurementunit, heat calculation unit and matched temperature sensor (PT1000). Flowmeteruses Faraday's electromagnetic induction principle to measure the flow rate.Combining with the temperature signal of water supply and return of pairedtemperature sensors, it can calculate, accumulate, store and display the coldand heat absorbed or released in the heat exchange circuit. The flow and energycalculation unit CPU and sampling module of the flowmeter all adopt theinternational advanced single chip computer, which has large memory capacity,high reliability of the equipment, and the heat calculation can really realizethe enthalpy calculation and achieve high accuracy. The pairing temperaturesensor adopts platinum resistance Pt1000, and its pairing error is less than0.1℃.
EMF5000R智能电磁能量计作为流量测量,采用高精度、高稳定性的铂金热电阻做温度测量,使该热能表具有非常优异的测量性能。可广泛应用于民用住宅小区、写字楼和企事业单位集中供热、供暖、空调等热量的计量。
EMF5000R Intelligenceelectromagnetism Caloric calorimeter As a flow measurement, the platinumthermal resistor with high accuracy and stability is used for temperaturemeasurement, which makes the thermometer have excellent measurementperformance. It can be widely used in the measurement of heat such as centralheating, heating and air conditioning in residential areas, office buildings,enterprises and institutions.
二、工作原理 Operational principle
三、产品特点 Product features
四、技术参数 Technical parameter
五、产品分类 Product classification
六、选型图谱 Selection chart
七、外形尺寸 External dimensions
八、安装说明 Installation instructions
九、仪表接线 Wiring instructions
以上参数仅供参考,如有改动恕不另行通知!
Above parameters are for referenceonly and are subject to change without prior notice!