一、产品简介   Product introduction

        WRN□T系列锅炉炉壁热电偶主要用于锅炉管壁、炉壁以及其他圆柱体表面温度的测量。采用Φ3~6mm的铠装元件作为测温探头，引线做成电缆状，测量端焊接或用螺钉固定在不锈钢集热块上(热电阻不适用焊接法)组成。将带有与炉壁相吻合的曲面感温片焊接或箍在管壁、炉壁、管道、圆柱体上，便可以测量表面温度。技术条件符合JB/T5582-91规定。

        WRN□T seriesboiler wall thermocouple is mainly used to measure the surface temperature ofboiler tube wall, furnace wall and other cylinders. use Φ The 3~6mm armoredelement is used as the temperature measuring probe, the lead is made into cableshape, and the measuring end is welded or fixed on the stainless steelcollector block with screws (welding method is not applicable to thermalresistance). The surface temperature can be measured by welding or hooping thecurved surface temperature sensing piece which is matched with the furnace wallon the pipe wall, furnace wall, pipe and cylinder. The technical conditionscomply with JB/T5582-91.

二、技术参数   Technical parameter

三、外形尺寸   External dimensions

四、产品分类   Product classification

以上参数仅供参考，如有改动恕不另行通知!

Above parameters arefor reference only and are subject to change without prior notice!