一、产品简介 Product Introduction

        YXC-100B、YXC-160B防爆电接点压力表是按GB3836.1«爆炸性环境用防爆电气设备通用要求»和GB3836.2«爆炸性环境用防爆电气设备、隔爆型电气设备"d"»的有关规定及相关标准进行设计，并经国家制定的检验机构所审批的图样和技术文件进行制造。

        YXC-100B andYXC-160B explosion-proof electrical contact pressure gauges are designed inaccordance with the relevant provisions and standards of GB3836.1 "GeneralRequirements for Explosion proof Electrical Equipment for ExplosiveEnvironments" and GB3836.2 "Explosion proof Electrical Equipment andExplosion proof Electrical Equipment" d "for ExplosiveEnvironments", and manufactured according to the drawings and technicaldocuments approved by the national inspection agency.

YXC-100B、YXC-160B防爆电接点压力表的防爆类别为II类隔爆型B级T4组、其标志为ExdIIBT4。

Explosion-proofcategory of YXC-100B and YXC-160B explosion-proof electric contact pressuregauges is Class II explosion-proof B-level T4 group, with the symbol ExdIIBT4.

YXC-100B、YXC-160B防爆电接点压力表适宜在有爆炸危险的场所内用来测量非结晶、非凝固的爆炸性混合物或各种无爆炸介质的压力。

YXC-100Band YXC-160B explosion-proof electrical contact pressure gauges are suitablefor measuring the pressure of non crystalline, non solidified explosivemixtures or various non explosive media in places with explosion hazards.

YXC-100B、YXC-160B防爆电接点压力表经与相应防爆性能或采用相应安全措施的电气器件(如继电器及接触器等)配套使用，便能对被控系统实现开环控制或发信(报警)的目的。

YXC-100Band YXC-160B explosion-proof electrical contact pressure gauges can be used inconjunction with electrical devices with corresponding explosion-proofperformance or safety measures (such as relays and contactors) to achieveopen-loop control or signal (alarm) of the controlled system.

二、工作原理 Operational principle

三、技术参数   Technical parameter

四、产品分类   Product classification

五、外形尺寸   External dimensions

六、安装说明   Installation instructions

以上参数仅供参考，如有改动恕不另行通知!

Above parameters arefor reference only and are subject to change without prior notice!